• NEW LOCATION TO BETTER SERVE YOU!

    Please note that we moved on 9/1/14 to a larger facility: 9283 Sutton Place in West Chester, Ohio.

Copings

Edge Shield Moc1 Coping System

(available Flat and Tapered)
The Edge Shield Moc1 Coping System is a time proven and economical design. It incorporates a continuous hold down cleat on the front side and fasteners at the rear. A wood nailer or substrate sufficient to hold fastener at rear face is required. This system has been tested to meet ANSI/SPRI ES-1 requirements for wind uplift. ES-TEST-STAMP

Edge Shield Moc2 Coping System

(available Flat and Tapered)
The Edge Shield Moc2 Coping System incorporates individual anchor plates of 20 gauge galvanized steel. Installed at 5'-0" on center, the plates eliminate exposed fasteners and allow the coping to be installed directly atop a masonry wall without a wood nailer.

Edge Shield Moc3 Coping System

(available Flat and Tapered)
The Edge Shield Moc3 Coping System is similar to the Moc2 substituting the individual anchor plates with 20 gauge spring plates. This system has been tested to meet ANSI/SPRI, ES-1 ratings. ES-TEST-STAMP

Comments are closed