EdgeShield Fascia System
Metal Panel System’s EdgeShield Fascia System is designed for ease of application while providing strong edge securement of roofing membrane. This cost saving design eliminates the labor-intensive splice lap typical of standard gravel stop details. The integrity of the membrane is maintained by means of a continuous base rail which eliminates the need to fasten through the membrane at the roof surface. This system has been tested to meet ANSI/SPRI ES-1 requirements for wind uplift. For more information about ANSI/SPRI ES-1 click here.
The EdgeShield Fascia System has a two piece design that is anchored to the building with a 20 gauge continuous cleat that is thicker the fascia cover. The cleat is easy to install with pre-punched holes to ensure proper fastener placement. This system is compatible with single ply roof membranes. The cover can be fabricated in widths up to 8 inches.
Metal Panel System’s EdgeShield Fascia System is designed for ease of application while providing strong edge securement of roofing membrane. This cost saving design eliminates the labor-intensive splice lap typical of standard gravel stop details. The integrity of the membrane is maintained by means of a continuous base rail which eliminates the need to fasten through the membrane at the roof surface. This system has been tested to meet ANSI/SPRI ES-1 requirements for wind uplift. For more information about ANSI/SPRI ES-1 click here.
The EdgeShield Fascia System has a two piece design that is anchored to the building with a 20 gauge continuous cleat that is thicker the fascia cover. The cleat is easy to install with pre-punched holes to ensure proper fastener placement. This system is compatible with single ply roof membranes. The cover can be fabricated in widths up to 8 inches.
Click to view full product image.
Click to view full product image.
More Information
- For single ply roofing systems including EPDM, PVC, and TPO
- Fast installation – Strip-in of field membrane sheet is not required
- Eliminates water line membrane penetrations at the perimeter of the roof
- Installation with continuous 20 gauge galvanized cleat
- Pre-punched holes for proper fastener placement
- Concealed splice plates
- Standard Kynar 500 finish
- 35 year finish warranty
MATERIAL THICKNESS OPTIONS include the following:
- 24 ga. (0.63 mm) galvalume
- 22 ga. (0.76 mm) galvalume
- 24 ga. (0.063 mm) stainless steel
- .032” (0.8 mm) aluminum
- .040” (1.0 mm) aluminum
- .050” (1.2 mm) aluminum
- .063” (1.5 mm) aluminum
EdgeShield Fascia is available in various finish options including:
- Standard Kynar 500 colors (see color chart for availability)
- Custom Kynar colors
- Galvanized steel or “paint grip”
- Mill finish aluminum
- Anodized aluminum
- 2B finish stainless
*Aluminum & Copper available in limited quantities, please call for further availability
